Configure FTP server in Linux

How to install FTP

The daemon is included in most versions of Linux. If you are using a Debian based distribution like Mint or Ubuntu, open a terminal window and type: sudo apt-get install vsftpd

If you are using a Red Hat based disto, open a terminal window and type: sudo yum install vsftp

How to configure FTP

To configure vsftp, open the vsftpd.conf file in the /etc directory. For instance, if you were using gedit as your text editor, you would type: sudo gedit /etc/vsftpd.conf

First, for a secure setup, you’ll want to disable anonymous access to your ftp server. Change this line: anonymous_enable=YES to anonymous_enable=NO

With anonymous access disabled, you’ll want to allow local users to log in, by uncommenting the following line: #local_enable=YES to local_enable=YES (simply remove the # sign).

Allow write access by uncommenting this line: #write_enable=YES to write_enable=YES

Save and close the file.

Setup an FTP user account:

sudo mkdir -p /home/ftp/ftpuser
sudo useradd ftpuser -d /home/ftp/ftpuser -s /bin/false
sudo passwd ftpuser

Restart your ftp server:

Debian: sudo etc/init.d/vsftpd restart

Red Hat: sudo service vsftpd restart

Test:

netstat -a | grep ftp

Adding a Map Drive through GPO

Open the Group Policy Management Console by searching for it from the Start Menu

You’ll want to drill down into your domain until you reach the Machines object, where you can right-click and choose to Create a GPO.

We have to give our new policy a name, we will name ours Mapped Drives (General).

Now we can right click on the policy and choose edit.

The policy that controls mapped drives is located at

User Configuration\Preferences\Drive Maps

We need to select the policy and right click in the white space and select new mapped drive.

Change the action to create, and type a location for your shared folder.

Now set the label, this is the name that will appear on the drive in my computer. You will also need to choose a drive letter, it is a best practice to choose a static letter across the board, the last thing you need to do is change the radio button at the bottom to Show this drive.

Now when the users logon the drives will be effortlessly mapped.

How to add a Start Menu to Windows 8 Desktop

The Start menu from the desktop mode in Windows 8 is one of the most controversial talking points of the new windows 8 operating system. I’ve been using Windows 8 for the past few months on a non-touch laptop and have found there aren’t too many things I need to do in the desktop mode that can’t be achieved by pinning programs to the Task bar, or using Win + x shortcut 

The program I’ve been trying is Classic Shell. Click the link to download it. The version tested is 3.6.2. Following the wizard to install it. Once installed have a read of the readme file. You’ll now have a Classic Start menu

One thing to note, the Windows Key now opens the Classic Start menu, so if you want to get back to the Metro Start menu, hold shift and click the Classic Start menu button. Classic Shell also has the ability to boot the computer straight to the Desktop mode. Take a look at the Classic Shell Settings as these are both configurable settings along with many others.

Hope this will give you a real feel to use windows 8 and windows 7 desktop. Now take a big breath and work on your windows 7 , oh no Grrrr. Windows 8 system......

How to copy incoming or outgoing emails to another mailbox in Exchange 2010

Occasionally you may have a requirement to copy incoming or outgoing emails for specific users to another mailbox for monitoring or compliance purposes.

To be able to do this you can use an Exchange Transport Rule.

First open the Exchange Management Console, expand Organization Configuration, and select Hub Transport.

Right click the blank space in the main window and select New Transport Rule.

Select the conditions you want for the rule. Select from people as a condition, and then click the underlined value people to select from which people you want the rule to apply to. Click Add, and then add the email accounts you want to copy emails from. In our example we want to copy emails from the accounts mailbox. Click OK.

Click Next.

Now select the Action for the rule, in our scenario we are going to chooseBlind carbon copy (Bcc) the message to addresses, once selected, click the underlined addresses value. Click Add, select the user to Bcc the emails to, in our example we are going to Bcc the Administrator email account, clickOK, click Next.

If you want to add an exception to the rule you can do so next, in our example we want all emails to be copied so we won’t select an exception. Click Next.

Then on the Configuration Summary page click New to create the rule.

Done.....

Extend Data Volume on a Windows Virtual Machine using VMware vCentre convertor

Already there is a method to do this task by extending the provisioned space but there we need to shutdown the server to add the hard disk,

This method doesn't need to shutdown the server to extend the virtual Drive.

Step 1:

Step 2:

Step 3:

Step 4:

Step 5:

Step 6: 

Step 7:

Step 8:

Step 9:

Extend Data Volume on a Windows Virtual Machine (VMware ESXi)

I had an issue recently with my disk space, I was running out of space so I need to add more space to the virtual Disk, 

But i was thinking if i add another new virtual disk and meagre that with the existing one i may need to shut down the server once. 

But luckily i had fee provisioned space so, I just increased the virtual disk space and then followed the steps given below,

Its worked well, but I couldn’t add the space without shutting down the server in this method.  

1.	Add Additional Space to the Virtual Hard Drive - Once connected, select your Virtual Machine from the Hosts & Clusters or VMs & Templates view. - Click "Edit Settings" - Select your Virtual Disk, and increase the Provisioned Space. - Click OK - Using the vSphere Client, connect to vCenter server or your host.
2.	Extend the Volume - Open a Command Prompt - Use the following commands from the Microsoft KB 325590 DISKPART>list volume (You'll see the volumes - note the vol number you want to expand) (Or whatever volume number you're expanding) (will extend to full amount of space available) - Access your Server (either Open Console from the vSphere Client or RDP)  c:\diskpart.exe  DISKPART>select volume 1  DISKPART>extend  DISKPART>exit

Set up an FTP server on Amazon AWS EC2

You really don't need to set up an FTP server if you simply want to tranfer files between your EC2 instance and your local machine. You can use PSFTP (coming with putty package) with a saved putty session for your EC2 conection. Open a command window, type in psftp your_saved_putty_session_name. Type ec2-user for  login as and you are connected.

If you don't like commandline tool, you can use Filezilla instead. Download and install Filezilla client.  Lauch Filezilla. Click Edit -> Settings and select SFTP under Connction. Click Add Keyfile to add the private key file you use for putty connection. Click OK.

Click File -> Site Manager, Click New Site, enter your AWS EC2's public DNS or IP in Host field. Choose SFTP, enter ec2-user in User field and click Connect.

Now you are connected to your EC2 instance with FileZilla.

If you still want to set up an FTP server on your AWS EC2. Below are steps to install VSFTP.

1. login to  your AWS management console.
   • Go to EC2 and click the Security Groups link.
   • Then choose the default group and switch to the inbound tab (at the bottom of the page)
   • Add the port ranges as above (20-21 and 40000-41000) and apply the rule changes
2. connect to your instance with putty.
3. login as ec2-user
4. sudo su
5. yum vsftpd
6. change the conf file. vim /etc/vsftpd/vsftpd.conf. Add

   write_enable=YES 
   
   pasv_max_port=41000
   pasv_min_port=40000
   port_enable=YES
   pasv_enable=YES
   
   

7. 
   Add an FTP user (see instruction here)
   
   

8. 
   Start the FTP server. service vsftpd start