Network Fundamentals Part 2

How to Install Windows 11 on VMware Virtual Machine - This PC can't run ...

How to Install Windows 11 on VMware Virtual Machine

 I tried installing Win 11 on a VMware Workstation Pro and got into a problem/ error. After a quick google search, i found a way to fix it. 

The error message was

The steps to follow as below 

1. While installing Windows 11, if your computer does not meet the hardware requirements, you will see a message stating, "This PC can't run Windows 11." Windows 11 setup was blocked due to missing hardware requirements.

1. When you see the above message, press Shift+F10 (Or Shift+fn+F10) on your keyboard simultaneously to launch a command prompt. At the command prompt, type regedit and press enter to launch the Windows Registry Editor

1. When the Registry Editor opens, navigate to: HKEY_LOCAL_MACHINE\SYSTEM\Setup, Right-click on the Setup key and select New > Key.

1. When prompted to name the key, Type LabConfig and press enter.

1. Now right-click on the LabConfig key and selecLabConfigt New > DWORD (32-bit) value and create a value named BypassTPMCheck, and set its data to 1. 

1. Once you configure the BypassTPMCheck key value
    under the LabConfig key, close the Registry Editor, and then type exit in the Command Prompt followed by enter to close the window. You will now be back at the message stating that the PC can't run Windows 11. Click on the back button in the Windows Setup dialog, as shown below. Press the back button in Windows setup.

1. You will now be back at the screen prompting you to select the version of Windows 11 you wish to install. You can now continue with the setup, and the hardware requirements will be bypassed, allowing you to install Windows 11.

SET PASSWORD has no significance for user ‘root’@’localhost’

Wait to see the series of CCNA videos and practicals.

CCNA 20-301: Chapter 1 -Network Fundamentals, Review Questions

 

CCNA 20-301: Chapter 1 -Network Fundamentals, Review Questions

1. Which one of the following is true about the Cisco core layer in the three-tier design?

A.     Never do anything to slow down traffic. This includes making sure you don’t use access lists, perform routing between virtual local area networks, or implement packet filtering.

B.      It’s best to support workgroup access here.

C.      Expanding the core, e.g., adding routers as the internetwork grows, is highly recommended as a first step in expansion.

D.     All cables from the Core must connect to the TOR.

2. Which one of the following best describes a SOHO network?

A.     It uses ff:ff:ff:ff:ff:ff as a layer 2 unicast address, which makes it more efficient in a small network

B.      It uses UDP as the Transport layer protocol exclusively, which saves bandwidth in a small network.

C.      A single or small group of users connecting to a switch, with a router providing a connection to the internet

D.     SOHO is the network cabling used from the access layer to the TOR

3. Which two of the following describe the access layer in the three-tier network design?(Choose two.)

A.     Microsegmentation

B.      Broadcast control

C.      PoE

D.     Connections to TOR

4. Which fiber type is a Cisco standard and has a distance of over 40 miles?

A.     1000Base-SX

B.      1000Base-LX

C.      1000Base-ZX

D.     10GBase-T

5. What is the speed of a T3?

A.     1.544Mbps

B.      2.0Mbps

C.      100Mpbs

D.     44.736Mbps

6. Which of the following is not provided by today’s NGFWs?

A.     IPS Inspection

B.      Layer 2 deep packet inspection

C.      Application Visibility and Control (AVC)

D.     Network Address Translation (NAT)

7. Which of the following is the standard for PoE+?

A.     802.3P

B.      802.3af

C.      802.3at

D.     802.3v6

8. What is the speed of the 802.3.an     standard?

A.     100Mbps

B.      1Gbps

C.      10Gbps

D.     100Gbps

Google Disabling Allow Less Secure Apps, How to create app password? A s...