How to type in Tamil on Apple Mac computers.

How to type in Tamil on Apple Mac computers. 

Go to System Preferences 

Then click Keyboard from System Preference. 

Then Go to Input Source tab in the menu and Click the Little + at the bottom left corner. 

Now Select Tamil from the left-hand side menu and then on the other side select Tamil Anjal and Click Add to setup the Tamil Phonetic Keyboard. 

To Type in Tamil, use the same shortcut Alt + 2. That’s all now you can type in Tamil phonetic keyboard. 

.

Tamil Phonetic Typing

How to use NHM Writer to Type in Tamil ( Windows )

Download the NHM Writer from below given link or google it to download.

https://en.freedownloadmanager.org/Windows-PC/NHM-Writer-FREE.html

Once the application is downloaded install it on your Laptop.

Double click the downloaded the file and click Yes for User Access Control  

Then Click Next, 

Then, Tick I Accept the Agreement and Click Next and again Next. 

Now you need to select the language in this screen Click the Drop Down and select Tamil

Then Click Next, Next, Next and Install. 

Once installation finished make sure to tick Launch NHM Writer

Click Finish. 

Now, Let see how we can type in Tamil 

Confirm the application is running , you can see a Bell icon ( NHM Writer)

If you click on this Bell you will see the following 

To type in Tamil, we need to select Alt+2 Tamil Phonetic Unicode  , you can do this just by a mouse click or use the Keyboard Shortcut  Alt+2

Once you select Alt+2 Tamil Phonetic Unicode you will see the Bell will be in Gold color

Now Go to Google form / Word or any application and type. You can see it type in Tamil. If you can’t see Tamil press Alt+2 it will change to Tamil

How to Delete a User Profile from the Registry

If you wish to delete a user profile that you have created is corrupted or got malware and you want to delete that profile completely and recreate a new profile. 

following steps will guide you step by step to delete and create a new profile. 

1) First find the user SID

From a command prompt type: wmic useraccount get name,sid 

2) Make sure the profile folder in C:\Users was completely gone ( deleted) 

then open registry edit 

3) Expand HKLM\Software\Microsoft\WindowsNT\CurrentVersion\ProfileListand find the key named with the SID of the desired user. Right clicking on the key, export to the desktop (you’ll need this in the next step). Right click on the folder and delete the key.

4) Using Notepad, I open the registry exported from the previous step. Find the GUID for the desired user. In the registry expand HKLM\Software\Microsoft\WindowsNT\CurrentVersion\ProfileGuid and find the key named with the GUID of the desired user. Right-click on the folder and deleted the key.

5) Delete the GUID: 

Thats all Now when you login as that user, Windows should automatically create the local profile.

 Enable Network Based Discovery Services (Server 2016 And 2012 R2 )

I have experienced an interesting issue today. I was about to set up a network sharing path to an application which doesn't support full path as its a network ( client-server) application. 

When i tried to browse the path under network I wasn't able to see any shared files under network. 

After some search on google and personal help from my Network Guru , I fix it 

Let's see what we need to do to enable it. 

There is few services and needs to be enabled to browse the file under network. 

1)DNS Client - Make sure its running 

2) Function Discovery Resource Publication Property - Running /Started

3) SSDP Discovery - Running / Started 

4) UPnP Device Host - Running / Started 

in addition to this services make sure the network discovery is turn on as well. 

Now we need to enable the netBios as well in TCP/IP

Thats all we should be able to see the path 

Enable IPv6 on CISCO 2960 Switch - Packet Tracer

Subscribe to " FACEITNET " Youtube channel for more interesting videos 

FaceITNet Youtube Channel

Most of us have used Cisco Packet Tracer simulator to do our cisco CCNA practicals.

Packet Tracer is a free application by cisco and can be downloaded under netacad.com website
( Click the blow link ). Recently cisco has supported Packet Tracer to Mac computers too.

https://www.netacad.com/courses/packet-tracer

But we all knew we are moving to IPv6 world and hence we need to run the IPv6 most of the time.

Unfortunately, packet Tracer doesn't support IPv6 on Switch by default. I am going to do the step-by-step configuration to enable IPv6 on CISCO 2960 switch.

Let's do it.

First of all we need to setup a small network to upgrader the IOS version, We need IOS version 150-2 to enable IPv6

we need a switch and a server to do this upgrade.

Assign IPs to both server and switch ( int vlan 1)

TFTP server : 192.168.1.1

Switch : 192.168.1.2

once the IPs are assigned we must be able to ping each other. 

Then make sure the server has got TFTP and it has IOS version 15 as well. 

Now lets go ahead and start the upgrade

in switch enter the following commands.

Switch#copy tftp: flash: 

Address or name of remote host []? 192.168.1.1

Source filename []? c2960-lanbasek9-mz.150-2.SE4.bin

Destination filename [c2960-lanbasek9-mz.150-2.SE4.bin]?

once you confirmed you will see the following 

Accessing tftp://192.168.1.1/c2960-lanbasek9-mz.150-2.SE4.bin...

Loading c2960-lanbasek9-mz.150-2.SE4.bin from 192.168.1.1: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

[OK - 4670455 bytes] 4670455 bytes copied in 0.199 secs (1886872 bytes/sec)

Alright now we have got the 150-2 version ios file to flash drive.

reload the switch and change the boot file using the following command

Switch(config)#boot system c2960-lanbasek9-mz.150-2.SE4.bin

Again reload the device to load 150.2 ios image.

Now you could see

Loading "flash:/c2960-lanbasek9-mz.150-2.SE4.bin"... ##############################

This means the device is now loading the IOS version 15.

once its done with booting we need to enable the IPv6 Dual-stack configuration in the switch

use the following command to enable the dual-stack configuration

Switch(config)#sdm prefer dual-ipv4-and-ipv6 default

That's all we are done and we should be able to use the IPv6 configuration now, this will take place once we reload the device

so reload one more time, we can see the IPv6 commands enabled.

Thanks,

Create Email Distribution List in office 365 and add users to the group

In this document I am going to show how we can create an email distribution list in Office 365 cloud ( Cloud exchange) and add users in to the distribution list. 

Distribution list is a handy way to get a group email to an In e-mail applications, a distribution list is a group of mail recipients that is addressed as a single recipient. Distribution lists are used to send e-mail to groups of people without having to enter each recipient's individual address. A distribution list is different from an e-mail list in that members cannot reply to the distribution list's name to send messages to everyone else in the group. 

But in Exchange cloud has an option to sent email to distribution list from out side the group as well. 

Lets see how we can create it. 

First of all login to you office portal @ https://admin.microsoft.com/

Then go to your admin page and click Groups 

Click + Add a Group 

Click Type and select Distribution list.

Give the name of your distribution list and email address. You can notice at the bottom it says Allow people outside of my organisation to send email to this distribution list.

Should you wish to receive mail click this and make it on. 

Thats all we have now created a distribution list and it will take some time to appear in your group list. 

Once the list is in the groups we will go and add users to our distribution list. 

In exchange we can't add users from external domain to distribution list, so the option for us to do this is, Create the external users as contact in the exchange contact and then we can add them to the distribution list. 

Create Contact in Exchange server 

Create new contact 

Now go back to Groups and click the newly created Distribution list and add the users under the members 

Click Edit and search the newly created contact and add them all in to the group. 

Thats all , we are now ready to receive email to the listed users using distribution list. 

Thanks 

Setup Remote Desktop Services in Windows Server 2012 R2

Setup Remote Desktop Services in Windows Server 2012 R2

RDS allows you to remove the repetitiveness of configuring and managing multiple PCs in multiple location.  In one way you can think of a RDS solution for your business as a multi-user “PC”. This means, you will be able to access your desktop from home or any branch office or on the go because you can access securely through Internet.

Let see how to install and setup RDS server in Win 2012R2

Installing RDS Roles

RDS have three core roles. we can installs and run on a single server or separate each role onto its own server.

For small environment we can run RDS all-in-one setup, this would save you hardware resources. 

If your environment is large you will have to run the roles in spread servers. 

To start open Server Manager then click Manager -> Add Roles and Features

On the next screen you will need to select 

Change the selection to Remote Desktop Services Installation then click Next

Click Quick Start setup you can add additional servers to each role to allow expansion

Change selection to Session-based desktop deployment and click Next

Connection Broker, Web Access and Session Host roles will be installed on the single server. Click Next

Restart the destination server automatically if required

Once finished click Close. Remote Desktop Services is now installed!